PEUGEOT 424642 Standard Brake Disc Rotor

179241111131 oem brake rotor high quality for brake disc Ø: 406 mm Height: 175 mm Num. of holes: 10 Centering Diameter: 194 mm Brake Disc Type: Vented Brake Disc Thickness: 48 mm Min. thickness: 38 mm Bolt Hole Circle Ø: 215 mm Brake System: Knorr K85 Fitting Position: Front Axle Weight: 33 kg....

Send Inquiry
Product Details

179241111131 oem brake rotor high quality for brake disc

Ø: 406 mm

Height: 175 mm

Num. of holes: 10

Centering Diameter: 194 mm

Brake Disc Type: Vented

Brake Disc Thickness: 48 mm

Min. thickness: 38 mm

Bolt Hole Circle Ø: 215 mm

Brake System: Knorr K85

Fitting Position: Front Axle

Weight: 33 kg.


Brake discs not design properly,it will change it’s performance after heating.It will also emerge mechanical deformation if  forced with un-even press ,to make the shoe and drum will not connect properly, the pedal effort and braking distance will  increased also.When the un- roundness of the working surface is too big,it will lead to self-locking,vibrates,and noise. Brake discs drum must has enough side thickness,and it also need cast out rib reinforcement on the surface at the mouth to improve the strength.And these ribs will also help for heat radiation. To reduce the friction surface temperature,shorten the cooling time of brake devices.improve the energy capacity 35%-40%.

The brake disc has better heat radiation ability than brake drum.When at frequent braking conditions,braking failure will not happen.

The changes of the size of brake disc after it’s heating won’t increase the distance of brake pedal to work.

If you're interested in the peugeot 424642 standard brake disc rotor, welcome to buy the quality product with our factory. As one of the leading China manufacturers and suppliers in this field, we also offer the wholesale service with competitive price.