AUTOB 4385812 Standard Brake Disc Rotor

Meritor oem aftermarket brake disc Supplementary Article/Info 2: with ABS sensor ring Ø: 434 mm Height: 150 mm Num. of holes: 10 Centering Diameter: 222 mm Brake Disc Type: Vented Brake Disc Thickness: 45 mm Min. thickness: 38 mm Bolt Hole Circle Ø: 250 mm Brake System: Meritor Fitting Position:...

Send Inquiry
Product Details

Meritor oem aftermarket brake disc


Supplementary Article/Info 2: with ABS sensor ring

Ø: 434 mm

Height: 150 mm

Num. of holes: 10

Centering Diameter: 222 mm

Brake Disc Type: Vented

Brake Disc Thickness: 45 mm

Min. thickness: 38 mm

Bolt Hole Circle Ø: 250 mm

Brake System: Meritor

Fitting Position: Rear Axle

Weight: 33 kg


內页.jpg


Brake discs not design properly,it will change it’s performance after heating.It will also emerge mechanical deformation if forced with un-even press,to make the shoe and drum will not connect properly, the pedal effort and braking distance will increased also.When the un- roundness of the working surface is too big,it will lead to self-locking,vibrates,and noise. Brake discs drum must has enough side thickness,and it also need cast out rib reinforcement on the surface at the mouth to improve the strength.And these ribs will also help for heat radiation. To reduce the friction surface temperature,shorten the cooling time of brake devices.improve the energy capacity 35%-40%.

Brake discs body makes of light alloy material(such as alloy aluminum). The inside plugged with iron gasket.This brake drum not only has light volume,it also has good heating radiating,used on cars mostly.

If you're interested in the autob 4385812 standard brake disc rotor, welcome to buy the quality product with our factory. As one of the leading China manufacturers and suppliers in this field, we also offer the wholesale service with competitive price.

Inquiry