3531661C2 NAVISTAR Standard Brake Disc Rotor

Brake disc for auto cars vw Location:Front Axle Height:46.5 mm Diameter:288 mm Centering Diameter:68 mm Pitch Circle Diameter:112 mm Brake Disc Thickness:15 mm Minimum Thickness:13 mm Number Of Holes:5 Solid Or Vented:S Weight:6.25 kg According to the performance and driving speed becomes higher...

Send Inquiry
Product Details

Brake disc for auto cars vw


Location:Front Axle

Height:46.5 mm

Diameter:288 mm

Centering Diameter:68 mm

Pitch Circle Diameter:112 mm

Brake Disc Thickness:15 mm

Minimum Thickness:13 mm

Number Of Holes:5

Solid Or Vented:S

Weight:6.25 kg


內页.jpg


According to the performance and driving speed becomes higher and higher for autos,to improve the stability of braking,disc brake is the trend for brake system.As the disc is exposed in the air,so it has good heat radiation ability.When the car is at high speed driving,or brakes at short times many times,the feasibility of the braking is not decline to make better braking effects.It enhances the safety of the autos.

According to the performance and driving speed becomes higher and higher for autos,to improve the stability of braking,disc brake is the trend for brake system.As the disc is exposed in the air,so it has good heat radiation ability.When the car is at high speed driving,or brakes at short times many times,the feasibility of the braking is not decline to make better braking effects.It enhances the safety of the autos.

If the drum not design properly,it will change it’s performance after heating.It will also emerge mechanical deformation if forced with un-even press ,to make the shoe and drum will not connect properly , the pedal effort and braking distance will increased also.When the un- roundness of the working surface is too big,it will lead to self-locking,vibrates,and noise. The the brake drum must has enough side thickness,and it also need cast out rib reinforcement on the surface at the mouth to improve the strength.And these ribs will also help for heat radiation. To reduce the friction surface temperature,shorten the cooling time of brake devices.improve the energy capacity 35%-40%.

After the brake drum working surface fixing with the drum.it will finish machining positioning with the bearing holes.The tolerance of the roundness and concentricity of the working surface of mini. Cars should be ≤0.03mm,the radial runout should be ≤0.05mm,stand unbalance ≤1.5N·cm.

If you're interested in the 3531661c2 navistar standard brake disc rotor, welcome to buy the quality product with our factory. As one of the leading China manufacturers and suppliers in this field, we also offer the wholesale service with competitive price.

Inquiry